麻辣GIS微信平台

更多 GIS 干货

微信关注不错过

安装ArcGIS License Manager 服务无法启动的解决方案汇总

在安装 ArcGIS for Desktop 的时候,经常会有同学遇到 License Manager 无法启动的情况,于是,小编整理了几个常见的解决方案。

方案零

先重启一下,没坏处。再检查一下是不是系统防火墙的问题,建议关闭防火墙。方法-----> 安装ArcGIS关闭Window防火墙的方法

方案一

确认已经替换 service.txt 文件

确认已经替换 service.txt 文件

确认已经替换 service.txt 文件

PS:小编说几句不快的话,新手安装 ArcGIS 的时候请您一定要按照教程一步一步来,确保每一步是正确的,不要以为自己是天才少了一步没什么问题。

PPS:小编已经在QQ群里遇到过好几位新手们让各位群友帮忙,结果一圈下来文件都没替换。所以,遇到问题,请先过脑后实践再开口。珍惜为您解决的问题的前辈啊。

方案二

手动启动 License Manager 服务。在计算机上右击,选择管理:

选择“服务”,找到 ArcGIS License Manager,右击,选择“启动”。

幸运的话,基本就可以了。

方案三

此方法来自QQ群的群友 @风中追风 整理的文档,原文地址:https://shimo.im/docs/DnmrKVKcTI4vhqgc?r=3O1Z44

这是一种基于 cmd 命令行的启动方法,不便之处是每次要开启arcgis前都要先开命令行,所以不建议连 cmd 是什么都不知道的用户使用。

1.将 service.txt 复制一份,比如 service副本.txt

大约是下面的这个样子。

2.修改端口

我们可能需要把27000修改为27002(27003,27004之类都可以),如下图:

也可以把this_host改成你自己的计算机名,增加成功机率,方法:我的电脑(此电脑)右键属性有一个【计算机名】。注意计算机名中不可有特殊符号哦,修改计算机名的方法-----> 安装ArcGIS修改计算机名

由于可能放在C盘缺少权限之类的问题,还需要右键设置 service副本.txt 权限

点击右边中间的【编辑】,把所有的都设置为允许。SYSTEM的和Users都这么设置

3.命令行启动服务

C:\Program Files (x86)\ArcGIS\License10.2\bin>
lmgrd.exe -z -c service副本.txt

快速打开命令行的方法:打开许可的bin目录下空白地方按shift右键【在此处打开命令窗口】

幸运的话,就可以启动服务了。

方法四

如果上述方法都不行,也有几个点可以建议参考(但能不能成功,也看具体计算机及人品。。)

  1. 重装 .net framework(10.2对应3.5版本,10.4、10.5要4.5以上版本)
  2. 换个 ArcGIS 安装包
  3. 关闭系统UAC

如果还是不行,重装系统吧。。

各路GISer的解决方法

感谢 @潜光隐耀 提供的方法:本人之前遇到过装D盘不行,后来重装到系统C盘就可以了(重装前清理了注册表)

相关阅读

麻辣GIS-Sailor

作者:

GIS爱好者,学GIS,更爱玩GIS。

声明

1.本文所分享的所有需要用户下载使用的内容(包括但不限于软件、数据、图片)来自于网络或者麻辣GIS粉丝自行分享,版权归该下载资源的合法拥有者所有,如有侵权请第一时间联系本站删除。

2.下载内容仅限个人学习使用,请切勿用作商用等其他用途,否则后果自负。

手机阅读
公众号关注
知识星球
手机阅读
麻辣GIS微信公众号关注
最新GIS干货
关注麻辣GIS知识星球
私享圈子

已有 185 条评论

  1. 麻辣GIS-阿干Ivy
    1#
    阿干Ivy  · 2018-07-29 16:58

    安装成功,谢谢大神,安装步骤好详细,造福大家啦

      1. 麻辣GIS-Sailor
        Sailor  · 2018-07-30 09:39

        enjoy it :-)

          1. 麻辣GIS-周
             · 2019-08-28 14:31

            lmgrd.exe : 无法将“lmgrd.exe”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写,如果包括路径,请确
            保路径正确,然后再试一次。
            所在位置 行:1 字符: 1
            + lmgrd.exe -z -c service副本.txt
            + ~~~~~~~~~
            + CategoryInfo : ObjectNotFound: (lmgrd.exe:String) [], CommandNotFoundException
            + FullyQualifiedErrorId : CommandNotFoundException

              1. 麻辣GIS-Sailor
                Sailor  · 2019-08-28 14:43

                你的目录下有这个文件吗?

                  1. 麻辣GIS-周
                     · 2019-08-28 14:52

                    有的

                  2. 麻辣GIS-周
                     · 2019-08-28 14:54

                    lmgrd.exe 名字都是复制过去的

                  3. 麻辣GIS-周
                     · 2019-08-28 14:56

                    你好作者,还有群吗,我也想加一个

              2. 麻辣GIS-Sailor
                Sailor  · 2019-08-28 14:55

                贴一下你的dir命令的执行结果

                  1. 麻辣GIS-周
                     · 2019-08-28 14:57

                    PS D:\安装文件\Arcgis\license10.6\bin> lmgrd.exe -z -c service副本.txt
                    lmgrd.exe : 无法将“lmgrd.exe”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写,如果包括路径,请确
                    保路径正确,然后再试一次。
                    所在位置 行:1 字符: 1
                    + lmgrd.exe -z -c service副本.txt
                    + ~~~~~~~~~
                    + CategoryInfo : ObjectNotFound: (lmgrd.exe:String) [], CommandNotFoundException
                    + FullyQualifiedErrorId : CommandNotFoundException


                    Suggestion [3,General]: 找不到命令 lmgrd.exe,但它确实存在于当前位置。默认情况下,Windows PowerShell 不会从当前位置加载 命令。如果信任此命令,请改为键入“.\lmgrd.exe”。有关详细信息,请参阅 "get-help about_Command_Precedence"。

                  2. 麻辣GIS-123
                    123  · 2020-01-10 23:52

                    我的也是这样的 怎么解决啊

              3. 麻辣GIS-狡猾的兔子
                狡猾的兔子  · 2020-01-17 22:25

                求问您这个问题解决了吗。。。

  2. 麻辣GIS-哦哦
    2#
    哦哦  · 2018-08-02 15:20

    感谢!

  3. 麻辣GIS-Yiiiii
    3#
    Yiiiii  · 2018-10-14 15:56

    请问楼主按照教程装完以后都不能打开防火墙了吗

      1. 麻辣GIS-Sailor
        Sailor  · 2018-10-14 16:53

        你可以开下试试能不能正常使用,能使用就可以开,但安装的时候不能开。

  4. 麻辣GIS-小黑
    4#
    小黑  · 2018-12-08 03:00

    我安装的时候cmd命令行里一直显示invalid license key.

  5. 麻辣GIS-Zvonimir
    5#
    Zvonimir  · 2019-01-17 20:38

    新装的win10,启动不了,用了命令的方法尝试启动,弹出"Sorry, this application cannot run under a Virtual Machine.",问题是我本来就没在虚拟机里额,咋回事呢?

      1. 麻辣GIS-Sailor
        Sailor  · 2019-01-17 21:02

        啥版本,10.6吗?

          1. 麻辣GIS-Zvonimir
            Zvonimir  · 2019-01-17 21:04

            额,对的,我现在准备换成10.5了。

          2. 麻辣GIS-南阳
            南阳  · 2019-08-01 01:03

            我的mac装虚拟机win10,安装10.6也提示上面那句话,10.6虚拟机中无法使用嘛?有人说需要更改参数,但具体没说是什么参数

              1. 麻辣GIS-Sailor
                Sailor  · 2019-08-01 09:52

                virtualbox 的话可以尝试打开虚拟机vmx文件,在末尾加上下面的内容,应该就监测不到了。

                monitor_control.restrict_backdoor = "TRUE"

                另外mac安装ArcGIS,强推荐Win to go,可以参考 https://malagis.com/mac-arcgis-install-2.html

          3. 麻辣GIS-咸菜
            咸菜  · 2020-07-06 16:46

            大佬 前几个月好好的,最近一打开就是sorry this application cannot run under a virtual machine
            win10系统

              1. 麻辣GIS-Sailor
                Sailor  · 2020-07-15 15:37

                啥?你最近系统改了啥

      2. 麻辣GIS-Dorad
        Dorad  · 2020-11-02 21:17

        可参考
        https://blog.cuger.cn/p/37141/

  6. 麻辣GIS-Amndao
    6#
    Amndao  · 2019-03-01 12:32

    我在创建TIN的时候说我createTin没有获得许可 是怎么回事啊

      1. 麻辣GIS-Sailor
        Sailor  · 2019-03-01 13:56

        你百度一下相应的错误就知道了,或者参考本站文章:https://malagis.com/arcgis-toolbox-can-not-use.html

  7. 麻辣GIS-嗯嗯
    7#
    嗯嗯  · 2019-03-05 21:07

    一直启动不了呀

  8. 麻辣GIS-Amy
    8#
    Amy  · 2019-03-09 20:33

    无法启动。。按启动没报错也没成功启动,没有反应??

      1. 麻辣GIS-Sailor
        Sailor  · 2019-03-11 12:15

        你使用第三种方法,cmd会有个报错。提供一下。

  9. 麻辣GIS-encore
    9#
    encore  · 2019-03-11 15:39

    在计算机管理的服务中显示license已经启动,但是打开license management还是没有启动,试过直接装arcgis,显示没有有效的license,求教

      1. 麻辣GIS-Sailor
        Sailor  · 2019-03-15 12:48

        重启一下,不行的话使用文章中第三种方法,看命令行报什么错。

          1. 麻辣GIS-009
            009  · 2020-11-16 19:00

            您好,在计算机管理的服务中显示license已经启动,但是打开license management还是没有启动,试过直接装arcgis,显示没有有效的license,用cmd后显示System Error:2 No such file or directory,请问应该怎么解决呢

              1. 麻辣GIS-Sailor
                Sailor  · 2020-11-23 22:09

                License被系统其他软件干扰了,重装安装,关闭所有的安全软件

      2. 麻辣GIS-三水
        三水  · 2020-08-04 10:52

        我的也是这样子,请问您最后怎么解决的呀?

          1. 麻辣GIS-三水
            三水  · 2020-08-04 11:35

            后来我跳过第四步启动了,因为几个方法都试了也一直启动不了,报错和大家一样,第五步也不行,localhost和127.什么都说无效,气的我直接打开arcgis,竟然打开了!

              1. 麻辣GIS-Sailor
                Sailor  · 2020-08-09 19:22

                打开了,说明服务应该已经启动了。

              2. 麻辣GIS-孤城落殇
                孤城落殇  · 2021-02-25 17:46

                我也是

              3. 麻辣GIS-1in
                1in  · 2021-08-16 15:40

                我也是!!!各位兄弟姐妹所有方法做了之后,还绕回来启动不了的,就直接开看看ArcMap,有可能已经顺利运行了

                  1. 麻辣GIS-wwwill03
                    wwwill03  · 2022-02-27 17:16

                    我的也是这样的,没有必要非得做那几步,直接跳过,然后竟然奇迹般的打开了!

                  2. 麻辣GIS-Sailor
                    Sailor  · 2022-03-01 14:01

                    厉害了。。

                  3. 麻辣GIS-111
                    111  · 2022-03-20 16:30

                    +1,整了一个下午不行,刚刚直接打开成功了

                  4. 麻辣GIS-mmk
                    mmk  · 2022-07-19 14:06

                    那你的软件能一直使用吗

                  5. 麻辣GIS-1in
                    1in  · 2022-07-19 14:37

                    还能使用。就是某天开始符号的初始样式集消失了,
                    导致我画不出虚线、铁路线等等的线型,
                    更后来各种样式都不在了,色卡、特殊符号都没有,只能用最基本的点点符号。
                    最近还发现我连接不了excel,还有kml无法转出成要素等荒谬的问题,
                    但同样的源文件在另一台电脑可以成功操作。
                    总之这个不完全和谐的玩意儿竟日渐出现了很多bug。

  10. 麻辣GIS-zxh
    10#
    zxh  · 2019-03-15 19:56

    第三种方法显示
    faild to open the TCP port number in the license

      1. 麻辣GIS-Sailor
        Sailor  · 2019-03-18 09:35

        你本地27017端口是不是被占用了?

          1. 麻辣GIS-zyj
            zyj  · 2019-06-05 15:27

            请问被占用的话该怎么操作啊

              1. 麻辣GIS-Sailor
                Sailor  · 2019-06-10 07:05

                换个端口啊

              2. 麻辣GIS-Sailor
                Sailor  · 2019-06-10 07:05

                或者把原来占用它的程序停掉

  11. 麻辣GIS-King Hugjiltu
    11#
    King Hugjiltu  · 2019-03-29 22:27

    第二部,成功,原来没有权限

  12. 麻辣GIS-忍忍参上
    12#
    忍忍参上  · 2019-04-11 22:10

    装了3次,终于安好了,结果启动不了,再三确定文件替换了,还是没法启动,上面的方法除了方法三都试了,想把电脑砸了

      1. 麻辣GIS-Sailor
        Sailor  · 2019-04-12 09:29

        报了什么错?方法不对,你再有劲,也不行啊

  13. 麻辣GIS-LI卜
    13#
    LI卜  · 2019-04-13 23:56

    为什么许可服务上边 什么都没有?其他的倒是没有什么。这样能用么?10.5版本的。

      1. 麻辣GIS-Sailor
        Sailor  · 2019-04-15 17:46

        你使用功能正常吗?License 和 管理器中看都是什么也没有吗?

          1. 麻辣GIS-LI卜
            LI卜  · 2019-04-15 17:59

            可以正常打开,应该不影响是使用。明天上课我再看一下。

  14. 麻辣GIS-求助
    14#
    求助  · 2019-04-28 16:26

    Server's System Date and Time
    16:24:37 (lmgrd) pid 13852
    16:24:37 (lmgrd) SLOG: Summary LOG statistics is enabled.
    16:24:37 (lmgrd) license manager: can't initialize:Cannot find license file.
    16:24:37 (lmgrd) The license files (or license server system network addresses) attempted are
    16:24:37 (lmgrd) listed below. Use LM_LICENSE_FILE to use a different license file,
    16:24:37 (lmgrd) or contact your software provider for a license file.
    16:24:37 (lmgrd) Filename: "C:\flexlm\license.dat"
    16:24:37 (lmgrd) License Path: "C:\flexlm\license.dat"
    16:24:37 (lmgrd) FlexNet Licensing error:-1,359
    16:24:37 (lmgrd) System Error:2 No such file or directory
    16:24:37 (lmgrd) Using license file "C:\flexlm\license.dat"

      1. 麻辣GIS-Sailor
        Sailor  · 2019-04-29 21:07

        从错误信息来看,是没有授权文件哇,你的service.txt替换了吗?

  15. 麻辣GIS-jungle
    15#
    jungle  · 2019-05-03 00:19

    文件也替换了,启动的时候没反应

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-05 18:17

        第三种方法会有报错,里面会有错误原因。

  16. 麻辣GIS-ggg
    16#
    ggg  · 2019-05-04 10:33

    启动就是没反应

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-05 18:17

        第三种方法会有报错,里面会有错误原因。

  17. 麻辣GIS-阿宁
    17#
    阿宁  · 2019-05-05 17:11

    试过了所有上面的方法,换了安装包,但是还是无法启动啊,没有反应

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-05 18:17

        第三种方法会有报错,里面会有错误原因。

  18. 麻辣GIS-xx
    18#
    xx  · 2019-05-06 23:41

    想问问我破解包,license manager都装了,service.txt也改了,可是还是会反复跳出没有有效的许可管理器.操作了上面的方法还是不行,求大神指教

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-08 20:20

        方法三会有一个报错,里面会有一个出错信息

  19. 麻辣GIS-haha
    19#
    haha  · 2019-05-10 11:07

    service.txt文件值得时哪一个?教程里没有说替换这个文件啊

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-10 11:33

        你确定吗?所有的安装教程里都有讲,仔细看一下?

          1. 麻辣GIS-aaa
            aaa  · 2019-06-22 02:40

            我看了好几遍 也觉得没有提到 service. txt啊 是说那个补丁替换吗 这个文件在哪里找啊

              1. 麻辣GIS-Sailor
                Sailor  · 2019-06-22 08:57

                补丁文件就那么几个,你打开看一下,就不用这在留言了。

  20. 麻辣GIS-S_base
    20#
    S_base  · 2019-05-16 08:44

    所有方法都试了,还是不行。方法三报错部分如下:
    ...
    (ARCGIS) EXITING DUE TO SIGNAL 27 Exit reason 4
    (lmgrd) ARCGIS exited with status 27 (No features to serve)
    (lmgrd) ARCGIS daemon found no features. Please correct license file and re-start daemons.
    ...

    两个月前安装是可以用的,后来一次系统更新之后破解文件被防火墙删了。。现在怎么也重新装不了。求助!谢谢!

      1. 麻辣GIS-Sailor
        Sailor  · 2019-05-16 16:36

        把防火墙关了啊。

          1. 麻辣GIS-S_base
            S_base  · 2019-05-16 22:03

            安装的时候肯定是关的,后来装完又打开的。中间一直用的好好的,突然某一天系统更新后那个AfCore.dll就被删了。所以装完也不能开了?

              1. 麻辣GIS-赤忱
                赤忱  · 2019-05-29 17:16

                遇到同样问题,重新怎么都启动不了

                  1. 麻辣GIS-Sailor
                    Sailor  · 2019-05-30 09:38

                    如果你不会在防火墙添加例外,就把防火墙关了,不要开。

                  2. 麻辣GIS-老杨
                    老杨  · 2019-09-11 17:41

                    同样的问题,关着防火墙也装不上orz再重启一遍没用的话准备换个版本试试了

                  3. 麻辣GIS-Sailor
                    Sailor  · 2019-09-12 14:43

                    不想关杀毒软件和防火墙,可以用老版本或者付费买正版。

  21. 麻辣GIS-胶片卷
    21#
    胶片卷  · 2019-06-07 16:36

    按照方法四,命令行运行说,无法识别Imgrd.exe,MacbookPro平行桌面里的win10教育版

      1. 麻辣GIS-Sailor
        Sailor  · 2019-06-10 07:07

        平行桌面的问题我这里无法提供帮助,请自己想办法解决。

  22. 麻辣GIS-天舒
    22#
    天舒  · 2019-06-18 11:32

    步骤很详细,安装成功了,谢谢

  23. 麻辣GIS-emm
    23#
    emm  · 2019-06-23 21:14

    Suggestion [3,General]: 找不到命令 lmgrd.exe,但它确实存在于当前位置。默认情况下,Windows PowerShell 不会从当前位置加载 命令。如果信任此命令,请改为键入“.\lmgrd.exe”。有关详细信息,请参阅 "get-help about_Command_Precedence"。
    PS C:\Program Files (x86)\ArcGIS\License10.6\bin> .\lmgrd.exe -z -c service副本.txt
    21:10:29 (lmgrd) -----------------------------------------------
    21:10:29 (lmgrd) Please Note:
    21:10:29 (lmgrd)
    21:10:29 (lmgrd) This log is intended for debug purposes only.
    21:10:29 (lmgrd) In order to capture accurate license
    21:10:29 (lmgrd) usage data into an organized repository,
    21:10:29 (lmgrd) please enable report logging. Use Flexera Software LLC's
    21:10:29 (lmgrd) software license administration solution,
    21:10:29 (lmgrd) FlexNet Manager, to readily gain visibility
    21:10:29 (lmgrd) into license usage data and to create
    21:10:29 (lmgrd) insightful reports on critical information like
    21:10:29 (lmgrd) license availability and usage. FlexNet Manager
    21:10:29 (lmgrd) can be fully automated to run these reports on
    21:10:29 (lmgrd) schedule and can be used to track license
    21:10:29 (lmgrd) servers and usage across a heterogeneous
    21:10:29 (lmgrd) network of servers including Windows NT, Linux
    21:10:29 (lmgrd) and UNIX.
    21:10:29 (lmgrd)
    21:10:29 (lmgrd) -----------------------------------------------
    21:10:29 (lmgrd)
    21:10:29 (lmgrd)
    21:10:29 (lmgrd) Server's System Date and Time: Sun Jun 23 2019 21:10:29 中国标准时间
    21:10:29 (lmgrd) pid 11220
    21:10:29 (lmgrd) SLOG: Summary LOG statistics is enabled.
    21:10:29 (lmgrd) license manager: can't initialize:Cannot find license file.
    21:10:29 (lmgrd) The license files (or license server system network addresses) attempted are
    21:10:29 (lmgrd) listed below. Use LM_LICENSE_FILE to use a different license file,
    21:10:29 (lmgrd) or contact your software provider for a license file.
    21:10:29 (lmgrd) Filename: "C:\flexlm\license.dat"
    21:10:29 (lmgrd) License Path: "C:\flexlm\license.dat"
    21:10:29 (lmgrd) FlexNet Licensing error:-1,359
    21:10:29 (lmgrd) System Error:2 No such file or directory
    21:10:29 (lmgrd) Using license file "C:\flexlm\license.dat"
    PS C:\Program Files (x86)\ArcGIS\License10.6\bin>

      1. 麻辣GIS-Sailor
        Sailor  · 2019-06-23 23:29

        这不是提示的很清楚吗:如果信任此命令,请改为键入“.\lmgrd.exe”,这个命令行就是会提示错误让你根据错误来排查问题的。如果对cmd命令是小白的话不建议用。

      2. 麻辣GIS-Sailor
        Sailor  · 2019-06-23 23:32

        不对,这段信息更有价值的是:can't initialize:Cannot find license file。检查你的授权文件

          1. 麻辣GIS-枯了
            枯了  · 2019-09-08 20:37

            这是什么意思

              1. 麻辣GIS-Sailor
                Sailor  · 2019-09-08 20:45

                找不到授权文件,应该是路径的问题。

                  1. 麻辣GIS-bing
                    bing  · 2019-09-12 14:37

                    我也是这个问题,是按照步骤替换的文件,请问怎么检查哪里路径出了问题呀

                  2. 麻辣GIS-Sailor
                    Sailor  · 2019-09-12 14:46

                    1.确认文件是否存在 2.文件能否正确被识别 3.文件内容是否正确。基本靠经验。

                  3. 麻辣GIS-bing
                    bing  · 2019-09-12 14:48

                    提示说Filename: "C:\flexlm\license.dat",
                    在C盘只找到一个空文件夹C:\ProgramData\FNP\FLEXlm,
                    怎么解决呀flexnet文件夹也在C:\ProgramData下

                  4. 麻辣GIS-Sailor
                    Sailor  · 2019-09-12 14:54

                    这点信息我也无法判断,你可以换个低版本试试。

                  5. 麻辣GIS-mitc
                    mitc  · 2019-09-15 18:13

                    我也是这个问题

  24. 麻辣GIS-李卜
    24#
    李卜  · 2019-06-25 10:39

    为什么我的GIS10.4.1安装后无法用XY转线那些工具,点开命令后GIS没有任何反映。?

      1. 麻辣GIS-Sailor
        Sailor  · 2019-06-25 13:08

        你就这一句话,我也判断不出来。

          1. 麻辣GIS-李卜
            李卜  · 2019-06-25 13:13

            就是安装后一切正常,就是转线这个工具,用过后,没有任何反应,试过多个版本。

  25. 麻辣GIS-劳尔
    25#
    劳尔  · 2019-07-31 09:09

    SLOG: FNPLS-INTERNAL-VL1-4096
    Starting vendor daemons ...
    License server manager (lmgrd) startup failed:
    CreateProcess error code: 0x5aa File= ARCGIS.exe

    提示ARCGIS.exe错误怎么办呀

      1. 麻辣GIS-Sailor
        Sailor  · 2019-07-31 23:40

        这不是已经提示你说License 服务没启动起来吗?

  26. 麻辣GIS-ydrs
    26#
    ydrs  · 2019-08-20 08:28

    请问:一直启动不了许可,点击启动的时候没有任何反映,打来管理上,看到的是服务已启动,该怎么处理?

      1. 麻辣GIS-Sailor
        Sailor  · 2019-08-20 13:06

        软件能正常启动吗?或者重启一下

  27. 麻辣GIS-ydrs
    27#
    ydrs  · 2019-08-21 17:06

    你好,我后面又看了相关的材料,最后把安装好的软件卸载了,把防火墙关了,重新安装软件,现已成功安装,并运行正常,缺点就是显示没有安装中文语言包,没有显示中文,现正在想办法。谢了!

      1. 麻辣GIS-Sailor
        Sailor  · 2019-08-27 21:46

        找个汉化包安装就好

  28. 麻辣GIS-阿萨德
    28#
    阿萨德  · 2019-08-23 17:04

    我这边license打开后,连启动/停止许可服务都突然不见了(之前是有的)!是怎么回事

      1. 麻辣GIS-Sailor
        Sailor  · 2019-08-27 21:47

        什么意思?按钮都不显示了?你是不是开错程序了

  29. 麻辣GIS-kk
    29#
    kk  · 2019-09-15 17:50

    命令行启动提示could not start arcgis vendor daemon

      1. 麻辣GIS-Sailor
        Sailor  · 2019-09-15 23:22

        这点信息太少,其他的log信息贴一下。

  30. 麻辣GIS-好梦如初
    30#
    好梦如初  · 2019-09-19 17:42

    啊啊啊啊 一开始不知道怎么回事 后面用命令行启动服务这个方法成功了

  31. 麻辣GIS-li
    31#
    li  · 2019-09-30 15:38

    15:35:46 (lmgrd) -----------------------------------------------
    15:35:46 (lmgrd) Please Note:
    15:35:46 (lmgrd)
    15:35:46 (lmgrd) This log is intended for debug purposes only.
    15:35:46 (lmgrd) In order to capture accurate license
    15:35:46 (lmgrd) usage data into an organized repository,
    15:35:46 (lmgrd) please enable report logging. Use Flexera Software LLC's
    15:35:46 (lmgrd) software license administration solution,
    15:35:46 (lmgrd) FlexNet Manager, to readily gain visibility
    15:35:46 (lmgrd) into license usage data and to create
    15:35:46 (lmgrd) insightful reports on critical information like
    15:35:46 (lmgrd) license availability and usage. FlexNet Manager
    15:35:46 (lmgrd) can be fully automated to run these reports on
    15:35:46 (lmgrd) schedule and can be used to track license
    15:35:46 (lmgrd) servers and usage across a heterogeneous
    15:35:46 (lmgrd) network of servers including Windows NT, Linux
    15:35:46 (lmgrd) and UNIX. Contact Flexera Software LLC at
    15:35:46 (lmgrd) www.flexerasoftware.com for more details on how to
    15:35:46 (lmgrd) obtain an evaluation copy of FlexNet Manager
    15:35:46 (lmgrd) for your enterprise.
    15:35:46 (lmgrd)
    15:35:46 (lmgrd) -----------------------------------------------
    15:35:46 (lmgrd)
    15:35:46 (lmgrd)
    15:35:46 (lmgrd) Server's System Date and Time: Mon Sep 30 2019 15:35:46 中国标准时间
    15:35:46 (lmgrd) pid 4808
    15:35:46 (lmgrd) SLOG: Summary LOG statistics is enabled.
    许可证启动不了啊啊啊啊

      1. 麻辣GIS-Sailor
        Sailor  · 2019-10-09 11:14

        这段日志中没有标具体问题。

  32. 麻辣GIS-九
    32#
     · 2019-10-16 18:23

    C:\Program Files (x86)\ArcGIS\License10.6\bin

  33. 麻辣GIS-七七
    33#
    七七  · 2019-10-22 17:23

    请问下可以安装在hyper-v的虚拟机吗?安装之后license没办法启动,打开arcmap报错“Sorry, this application cannot run under a Virtual Machine”

      1. 麻辣GIS-Sailor
        Sailor  · 2019-11-08 13:20

        高版本已经不支持虚拟机安装了。

  34. 麻辣GIS-beihai
    34#
    beihai  · 2019-10-25 17:17

    点击启动后没办法变成running

      1. 麻辣GIS-Sailor
        Sailor  · 2019-11-08 13:20

        参照文中的三种方法排查。

  35. 麻辣GIS-灰灰
    35#
    灰灰  · 2019-11-03 20:30

    arcmap 做好地图没法发布服务啊啊啊啊啊啊啊,根本没有服务器连接

      1. 麻辣GIS-Sailor
        Sailor  · 2019-11-08 13:21

        百度下ArcGIS发布地图服务?你看看你的机器中所有的软件都装了没。

  36. 麻辣GIS-emap
    36#
    emap  · 2019-11-20 13:45

    求助,license 还是无法启动,

    以上 除了 重装系统,其他方法都看过了,
    报错信息如下,麻烦帮忙看看:
    13:32:26 (lmgrd) Server's System Date and Time: Wed Nov 20 2019 13:32:26 中国标准时间
    13:32:26 (lmgrd) pid 3084
    13:32:26 (lmgrd) SLOG: Summary LOG statistics is enabled.
    13:32:26 (lmgrd) Done rereading
    13:32:26 (lmgrd) FlexNet Licensing (v11.13.1.5 build 183191 i86_n3) started on ym-PC (IBM PC) (11/20/2019)
    13:32:26 (lmgrd) Copyright (c) 1988-2015 Flexera Software LLC. All Rights Reserved.
    13:32:26 (lmgrd) World Wide Web: http://www.flexerasoftware.com
    13:32:26 (lmgrd) lmdown/lmreread only allowed on this machine
    13:32:26 (lmgrd) License file(s): C:\Program Files (x86)\ArcGIS\License10.5\bin\service.txt
    13:32:26 (lmgrd) lmgrd tcp-port 27008
    13:32:26 (lmgrd) (@lmgrd-SLOG@) ===============================================
    13:32:26 (lmgrd) (@lmgrd-SLOG@) === LMGRD ===
    13:32:26 (lmgrd) (@lmgrd-SLOG@) Start-Date: Wed Nov 20 2019 13:32:26 中国标准时间
    13:32:26 (lmgrd) (@lmgrd-SLOG@) PID: 3084
    13:32:26 (lmgrd) (@lmgrd-SLOG@) LMGRD Version: v11.13.1.5 build 183191 i86_n3 ( build 183191 (ipv6))
    13:32:26 (lmgrd) (@lmgrd-SLOG@)
    13:32:26 (lmgrd) (@lmgrd-SLOG@) === Network Info ===
    13:32:26 (lmgrd) (@lmgrd-SLOG@) Listening port: 27008
    13:32:26 (lmgrd) (@lmgrd-SLOG@)
    13:32:26 (lmgrd) (@lmgrd-SLOG@) === Startup Info ===
    13:32:26 (lmgrd) (@lmgrd-SLOG@) Is LS run as a service: Yes
    13:32:26 (lmgrd) (@lmgrd-SLOG@) Server Configuration: Single Server
    13:32:26 (lmgrd) (@lmgrd-SLOG@) Command-line options used at LS startup: -c C:\Program Files (x86)\ArcGIS\License10.5\bin\service.txt -l C:\Program Files (x86)\ArcGIS\License10.5\bin\lmgrd9.log -z -s -local
    13:32:26 (lmgrd) (@lmgrd-SLOG@) License file(s) used: C:\Program Files (x86)\ArcGIS\License10.5\bin\service.txt
    13:32:26 (lmgrd) (@lmgrd-SLOG@) ===============================================
    13:32:26 (lmgrd) SLOG: FNPLS-INTERNAL-VL1-4096
    13:32:26 (lmgrd) Starting vendor daemons ...
    13:32:26 (lmgrd) Started ARCGIS (pid 6264)
    13:32:29 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:29 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:29 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:31 (lmgrd) ARCGIS exited with status 1 signal = 540
    13:32:31 (lmgrd) Since this is an unknown status, license server
    13:32:31 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:31 (lmgrd) REStarted ARCGIS (pid 8576)
    13:32:32 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:32 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:32 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:36 (lmgrd) ARCGIS exited with status 1 signal = 548
    13:32:36 (lmgrd) Since this is an unknown status, license server
    13:32:36 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:36 (lmgrd) REStarted ARCGIS (pid 8964)
    13:32:37 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:37 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:37 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:41 (lmgrd) ARCGIS exited with status 1 signal = 564
    13:32:41 (lmgrd) Since this is an unknown status, license server
    13:32:41 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:41 (lmgrd) REStarted ARCGIS (pid 8444)
    13:32:42 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:42 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:42 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:46 (lmgrd) ARCGIS exited with status 1 signal = 572
    13:32:46 (lmgrd) Since this is an unknown status, license server
    13:32:46 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:46 (lmgrd) REStarted ARCGIS (pid 8800)
    13:32:47 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:47 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:47 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:51 (lmgrd) ARCGIS exited with status 1 signal = 580
    13:32:51 (lmgrd) Since this is an unknown status, license server
    13:32:51 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:51 (lmgrd) REStarted ARCGIS (pid 9144)
    13:32:52 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:52 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:52 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:32:56 (lmgrd) ARCGIS exited with status 1 signal = 588
    13:32:56 (lmgrd) Since this is an unknown status, license server
    13:32:56 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:32:56 (lmgrd) REStarted ARCGIS (pid 7660)
    13:32:57 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:32:57 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:32:57 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:33:01 (lmgrd) ARCGIS exited with status 1 signal = 608
    13:33:01 (lmgrd) Since this is an unknown status, license server
    13:33:01 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:33:01 (lmgrd) REStarted ARCGIS (pid 7520)
    13:33:05 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:33:05 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:33:05 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:33:06 (lmgrd) ARCGIS exited with status 1 signal = 612
    13:33:06 (lmgrd) Since this is an unknown status, license server
    13:33:06 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:33:06 (lmgrd) REStarted ARCGIS (pid 5912)
    13:33:09 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:33:09 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:33:09 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:33:11 (lmgrd) ARCGIS exited with status 1 signal = 620
    13:33:11 (lmgrd) Since this is an unknown status, license server
    13:33:11 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:33:11 (lmgrd) REStarted ARCGIS (pid 4000)
    13:33:15 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:33:15 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:33:15 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:33:16 (lmgrd) ARCGIS exited with status 1 signal = 628
    13:33:16 (lmgrd) Since this is an unknown status, license server
    13:33:16 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    13:33:16 (lmgrd) REStarted ARCGIS (pid 8764)
    13:33:19 (ARCGIS) Unable to initialize access to trusted storage: 6
    13:33:19 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    13:33:19 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    13:33:21 (lmgrd) ARCGIS exited with status 1 signal = 636
    13:33:21 (lmgrd) Please correct problem and restart daemons

      1. 麻辣GIS-Sailor
        Sailor  · 2019-11-26 13:15

        那只能重装了。

      2. 麻辣GIS-Peg
        Peg  · 2019-12-13 15:25

        遇到了同样的问题,系统是win2019,因为win7和win10都装不了,CPU不支持

          1. 麻辣GIS-Sailor
            Sailor  · 2020-01-10 13:11

            系统不支持?这个问题一般就是相关文件没替换或者服务启动没权限。

      3. 麻辣GIS-装ArcGIS装哭了
        装ArcGIS装哭了  · 2020-07-02 10:32

        您的这个问题解决了吗

  37. 麻辣GIS-yph20140709
    37#
    yph20140709  · 2020-01-06 12:48

    按方法三提示“sorry, this application cannot run under a Virtual Machine.” 问题是我的电脑根本没安装虚拟机,也没找到vmx文件。该怎么办呢?(我的系统是Win10)

      1. 麻辣GIS-Sailor
        Sailor  · 2020-01-10 13:12

        实体机报这个错?一般在虚拟机会报这个错。

  38. 麻辣GIS-M某某
    38#
    M某某  · 2020-02-02 13:14

    求助,我已经重新安装了还是这个问题,一直报错,希望楼主解答,谢谢
    Problem Connecting to License Manager

    Provide your license server administrator with the following information:Error Code= -25

    License server system does not support this version of this feature.Feature: ARC/INFO

    License path: @localhost;

    FlexNet Licensing error:-25, 147

    ArcGIS for Desktop/Engine 10.2 cannot connect to previous versions of the ArcGISLicense Manager. Please contact your organization's License Administrator toensure that your License Manager is version 10.2 or newer.

      1. 麻辣GIS-Sailor
        Sailor  · 2020-02-05 21:27

        这个从报错来看,是你的License Manager版本和ArcGIS版本不一致?

          1. 麻辣GIS-M某某
            M某某  · 2020-02-05 22:03

            我安装包是下载这里的,也是按照教程装的,请问应该怎么解决?

              1. 麻辣GIS-Sailor
                Sailor  · 2020-02-06 10:26

                能确认是同一个版本吗?如果能的话,排查你的License Manager是不是没有安装好,补丁文件有没有被删除。

                  1. 麻辣GIS-M某某
                    M某某  · 2020-02-09 12:14

                    好的,谢谢,我试试

  39. 麻辣GIS-了
    39#
     · 2020-02-12 13:39

    安装的时候按了停止没有反应怎么办

      1. 麻辣GIS-Sailor
        Sailor  · 2020-02-14 16:51

        通过系统服务管理操作

  40. 麻辣GIS-T某某
    40#
    T某某  · 2020-02-19 18:34

    启动了,但是无法重新读取许可,这是为什么呀

      1. 麻辣GIS-Sailor
        Sailor  · 2020-02-21 11:10

        提示什么报错?

  41. 麻辣GIS-kundera
    41#
    kundera  · 2020-03-04 15:32

    许可服务器状态未运行 怎么办啊

      1. 麻辣GIS-Sailor
        Sailor  · 2020-03-06 20:24

        文章中不是已经提供了三种方法吗,你有没有尝试过?

  42. 麻辣GIS-新人新人哦
    42#
    新人新人哦  · 2020-03-05 23:30

    安装挺顺利的,但是为什么连接不上AECMAP的服务器。

      1. 麻辣GIS-Sailor
        Sailor  · 2020-03-06 20:24

        你的License启动了没?

  43. 麻辣GIS-iaiaa
    43#
    iaiaa  · 2020-03-12 16:38

    360杀毒的防火墙也会与GIS冲突,我一般都会卸载360

      1. 麻辣GIS-Sailor
        Sailor  · 2020-03-12 17:36

        是的,360我认为是一款流氓软件 。

  44. 麻辣GIS-sliver
    44#
    sliver  · 2020-03-18 17:31

    能帮忙看一下出问题在哪里吗,这是第三种方法


    lmgrd.exe : 无法将“lmgrd.exe”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写,如果包括路径,请确
    保路径正确,然后再试一次。
    所在位置 行:1 字符: 1
    + lmgrd.exe -z -c service副本.txt
    + ~~~~~~~~~
    + CategoryInfo : ObjectNotFound: (lmgrd.exe:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

      1. 麻辣GIS-Sailor
        Sailor  · 2020-03-19 09:36

        你试试 ./lmgrd.exe

  45. 麻辣GIS-sliver
    45#
    sliver  · 2020-03-19 21:01

    这回是这样的
    PS C:\Program Files (x86)\ArcGIS\License10.6\bin> ./lmgrd.exe
    20:52:38 (lmgrd) -----------------------------------------------
    20:52:38 (lmgrd) Please Note:
    20:52:38 (lmgrd)
    20:52:38 (lmgrd) This log is intended for debug purposes only.
    20:52:38 (lmgrd) In order to capture accurate license
    20:52:38 (lmgrd) usage data into an organized repository,
    20:52:38 (lmgrd) please enable report logging. Use Flexera Software LLC's
    20:52:38 (lmgrd) software license administration solution,
    20:52:38 (lmgrd) FlexNet Manager, to readily gain visibility
    20:52:38 (lmgrd) into license usage data and to create
    20:52:38 (lmgrd) insightful reports on critical information like
    20:52:38 (lmgrd) license availability and usage. FlexNet Manager
    20:52:38 (lmgrd) can be fully automated to run these reports on
    20:52:38 (lmgrd) schedule and can be used to track license
    20:52:38 (lmgrd) servers and usage across a heterogeneous
    20:52:38 (lmgrd) network of servers including Windows NT, Linux
    20:52:38 (lmgrd) and UNIX.
    20:52:38 (lmgrd)
    20:52:38 (lmgrd) -----------------------------------------------
    20:52:38 (lmgrd)
    20:52:38 (lmgrd)
    20:52:38 (lmgrd) Server's System Date and Time: Thu Mar 19 2020 20:52:38 中国标准时间
    20:52:38 (lmgrd) SLOG: Summary LOG statistics is enabled.
    20:52:38 (lmgrd) Running the license server manager (lmgrd) in dedicated windows ...
    20:52:38 (lmgrd) Use -z to run in foreground in this window

      1. 麻辣GIS-Sailor
        Sailor  · 2020-03-21 22:15

        这个里面没有报错的信息啊,你是不是没复制全?

  46. 麻辣GIS-WSY
    46#
    WSY  · 2020-04-04 14:23

    启动不了证书,文件都替换了。点击启动无响应,服务里面已经显示启动。谢谢。
    PS C:\Program Files (x86)\ArcGIS\License10.2\bin> lmgrd.exe -z -c service副本.txt
    lmgrd.exe : 无法将“lmgrd.exe”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写,如果包括路径,请确
    保路径正确,然后再试一次。
    所在位置 行:1 字符: 1
    + lmgrd.exe -z -c service副本.txt
    + ~~~~~~~~~
    + CategoryInfo : ObjectNotFound: (lmgrd.exe:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException


    Suggestion [3,General]: 找不到命令 lmgrd.exe,但它确实存在于当前位置。默认情况下,Windows PowerShell 不会从当前位置加载 命令。如果信任此命令,请改为键入“.\lmgrd.exe”。有关详细信息,请参阅 "get-help about_Command_Precedence"。
    PS C:\Program Files (x86)\ArcGIS\License10.2\bin> .\lmgrd.exe
    14:17:37 (lmgrd) -----------------------------------------------
    14:17:37 (lmgrd) Please Note:
    14:17:37 (lmgrd)
    14:17:37 (lmgrd) This log is intended for debug purposes only.
    14:17:37 (lmgrd) In order to capture accurate license
    14:17:37 (lmgrd) usage data into an organized repository,
    14:17:37 (lmgrd) please enable report logging. Use Flexera Software LLC's
    14:17:37 (lmgrd) software license administration solution,
    14:17:37 (lmgrd) FlexNet Manager, to readily gain visibility
    14:17:37 (lmgrd) into license usage data and to create
    14:17:37 (lmgrd) insightful reports on critical information like
    14:17:37 (lmgrd) license availability and usage. FlexNet Manager
    14:17:37 (lmgrd) can be fully automated to run these reports on
    14:17:37 (lmgrd) schedule and can be used to track license
    14:17:37 (lmgrd) servers and usage across a heterogeneous
    14:17:37 (lmgrd) network of servers including Windows NT, Linux
    14:17:37 (lmgrd) and UNIX. Contact Flexera Software LLC at
    14:17:37 (lmgrd) www.flexerasoftware.com for more details on how to
    14:17:37 (lmgrd) obtain an evaluation copy of FlexNet Manager
    14:17:37 (lmgrd) for your enterprise.
    14:17:37 (lmgrd)
    14:17:37 (lmgrd) -----------------------------------------------
    14:17:37 (lmgrd)
    14:17:37 (lmgrd)
    14:17:37 (lmgrd) Running the license server manager (lmgrd) in dedicated windows ...
    14:17:37 (lmgrd) Use -z to run in foreground in this window
    PS C:\Program Files (x86)\ArcGIS\License10.2\bin>

      1. 麻辣GIS-Sailor
        Sailor  · 2020-04-06 20:24

        根据提示来,如果信任此命令,请改为键入“.\lmgrd.exe”。

  47. 麻辣GIS-程程
    47#
    程程  · 2020-04-09 18:59

    所有的流程都没问题,就是最后打不开软件显示发送错误报告

      1. 麻辣GIS-Sailor
        Sailor  · 2020-04-11 10:10

        说明你的系统中的某些软件禁止了软件的相关进程。

  48. 麻辣GIS-hy
    48#
    hy  · 2020-04-15 13:07

    无法启动服务,且此电脑系统服务里显示系统找不到指定文件

    C:\Users\缺德>C:\新建ArcGIS10.2\License10.2\bin\lmgrd -z -c service.txt"
    13:00:32 (lmgrd) -----------------------------------------------
    13:00:32 (lmgrd) Please Note:
    13:00:32 (lmgrd)
    13:00:32 (lmgrd) This log is intended for debug purposes only.
    13:00:32 (lmgrd) In order to capture accurate license
    13:00:32 (lmgrd) usage data into an organized repository,
    13:00:32 (lmgrd) please enable report logging. Use Flexera Software LLC's
    13:00:32 (lmgrd) software license administration solution,
    13:00:32 (lmgrd) FlexNet Manager, to readily gain visibility
    13:00:32 (lmgrd) into license usage data and to create
    13:00:32 (lmgrd) insightful reports on critical information like
    13:00:32 (lmgrd) license availability and usage. FlexNet Manager
    13:00:32 (lmgrd) can be fully automated to run these reports on
    13:00:32 (lmgrd) schedule and can be used to track license
    13:00:32 (lmgrd) servers and usage across a heterogeneous
    13:00:32 (lmgrd) network of servers including Windows NT, Linux
    13:00:32 (lmgrd) and UNIX. Contact Flexera Software LLC at
    13:00:32 (lmgrd) www.flexerasoftware.com for more details on how to
    13:00:32 (lmgrd) obtain an evaluation copy of FlexNet Manager
    13:00:32 (lmgrd) for your enterprise.
    13:00:32 (lmgrd)
    13:00:32 (lmgrd) -----------------------------------------------
    13:00:32 (lmgrd)
    13:00:32 (lmgrd)
    13:00:32 (lmgrd) pid 14452
    13:00:32 (lmgrd) license manager: can't initialize:Cannot find license file.
    13:00:32 (lmgrd) The license files (or license server system network addresses) attempted are
    13:00:32 (lmgrd) listed below. Use LM_LICENSE_FILE to use a different license file,
    13:00:32 (lmgrd) or contact your software provider for a license file.
    13:00:32 (lmgrd) Filename: "C:\flexlm\license.dat"
    13:00:32 (lmgrd) License Path: "C:\flexlm\license.dat"
    13:00:32 (lmgrd) FlexNet Licensing error:-1,359
    13:00:32 (lmgrd) System Error:2 No such file or directory
    13:00:32 (lmgrd) For further information, refer to the FlexNet Licensing documentation,available at "www.flexerasoftware.com".
    13:00:32 (lmgrd) Using license file "C:\flexlm\license.dat"

    请问楼主怎么解决,谢谢

      1. 麻辣GIS-Sailor
        Sailor  · 2020-04-21 16:25

        试试不用中文安装路径?

  49. 麻辣GIS-mudandandan
    49#
    mudandandan  · 2020-05-21 12:24

    您好,使用前三种方法,还是启动不了,如下:
    12:15:40 (ARCGIS) Invalid license key (inconsistent authentication code)
    12:15:40 (ARCGIS) ==>FEATURE Vector ARCGIS 10.6 permanent uncounted \
    vendor_info=7KNJDRHFHBK4CFDMJ214 SIGN="052E ABFC 32DD 2473 \
    DEFD E276 4BF3 E0DB 87EB 2203 5A30 C014 19A1 C35E 2154 08B1 \
    9460 A2B9 6701 DC4D CAF2 E2FE 1347 0E36 90FA 4F3B E864 BEC8 \
    D3A2 A615"
    12:15:40 (ARCGIS) Invalid license key (inconsistent authentication code)
    12:15:40 (ARCGIS) ==>FEATURE Viewer ARCGIS 10.6 permanent uncounted \
    vendor_info=7KNJDRHFHBK4CFDMJ214 SIGN="052E ABFC 32DD 2473 \
    DEFD E276 4BF3 E0DB 87EB 2203 5A30 C014 19A1 C35E 2154 08B1 \
    9460 A2B9 6701 DC4D CAF2 E2FE 1347 0E36 90FA 4F3B E864 BEC8 \
    D3A2 A615"
    12:15:40 (ARCGIS) Invalid license key (inconsistent authentication code)
    12:15:40 (ARCGIS) ==>FEATURE VirtualEarthEng ARCGIS 10.6 permanent uncounted \
    vendor_info=7KNJDRHFHBK4CFDMJ214 SIGN="052E ABFC 32DD 2473 \
    DEFD E276 4BF3 E0DB 87EB 2203 5A30 C014 19A1 C35E 2154 08B1 \
    9460 A2B9 6701 DC4D CAF2 E2FE 1347 0E36 90FA 4F3B E864 BEC8 \
    D3A2 A615"
    12:15:40 (ARCGIS) License server system started on DESKTOP-1770R26
    12:15:40 (ARCGIS) No features to serve, exiting
    12:15:40 (ARCGIS) EXITING DUE TO SIGNAL 27 Exit reason 4
    12:15:45 (lmgrd) ARCGIS exited with status 27 (No features to serve)
    12:15:45 (lmgrd) ARCGIS daemon found no features. Please correct
    12:15:45 (lmgrd) license file and re-start daemons.
    12:15:45 (lmgrd)
    12:15:45 (lmgrd) This may be due to the fact that you are using
    12:15:45 (lmgrd) a different license file from the one you expect.
    12:15:45 (lmgrd) Check to make sure that:
    12:15:45 (lmgrd) service.txt
    12:15:45 (lmgrd) is the license file you want to use.
    12:15:45 (lmgrd)

    我已经确认service.txt已经替换过了,是10.6版本。

      1. 麻辣GIS-Sailor
        Sailor  · 2020-05-21 21:20

        This may be due to the fact that you are using a different license file from the one you expect. 感觉是License的版本不对,或者 service.txt 无效。

  50. 麻辣GIS-张木南
    50#
    张木南  · 2020-05-23 18:23

    博主你好,更改许可管理器的时候是输入自己的计算机名称么?显示没有有效的许可管理器是什么意思呢

      1. 麻辣GIS-Sailor
        Sailor  · 2020-05-25 15:48

        输localhost和计算机名称都可以,教程有写。有有效的许可管理器应该服务没启,或者许可没打补丁。

  51. 麻辣GIS-林夕
    51#
    林夕  · 2020-06-06 15:41

    win10新电脑,一开始装,Licence无法其中,卸了重新装,安装过程一切正常,但是打开map一片空白,根本不是正常的页面,急求回复。

      1. 麻辣GIS-Sailor
        Sailor  · 2020-06-06 16:33

        map一片空白是什么意思?没能理解。

  52. 麻辣GIS-白开水
    52#
    白开水  · 2020-06-27 22:12

    首先,确认service.txt替换了,防火墙关闭了,window defener排除了两个exe,安装前arcgis的注册表删干净了。还是提示invalid license key快被逼疯了

      1. 麻辣GIS-Sailor
        Sailor  · 2020-06-30 09:55

        说明还是有地方卡了你的进程。

  53. 麻辣GIS-求助
    53#
    求助  · 2020-09-19 10:59

    执行完第三步后出现如下错误,谢谢
    PS D:\path\ArcGIS\License10.6\bin> .\lmgrd.exe -z -c service副本.txt
    10:55:46 (lmgrd) -----------------------------------------------
    10:55:46 (lmgrd) Please Note:
    10:55:46 (lmgrd)
    10:55:46 (lmgrd) This log is intended for debug purposes only.
    10:55:46 (lmgrd) In order to capture accurate license
    10:55:46 (lmgrd) usage data into an organized repository,
    10:55:46 (lmgrd) please enable report logging. Use Flexera Software LLC's
    10:55:46 (lmgrd) software license administration solution,
    10:55:46 (lmgrd) FlexNet Manager, to readily gain visibility
    10:55:46 (lmgrd) into license usage data and to create
    10:55:46 (lmgrd) insightful reports on critical information like
    10:55:46 (lmgrd) license availability and usage. FlexNet Manager
    10:55:46 (lmgrd) can be fully automated to run these reports on
    10:55:46 (lmgrd) schedule and can be used to track license
    10:55:46 (lmgrd) servers and usage across a heterogeneous
    10:55:46 (lmgrd) network of servers including Windows NT, Linux
    10:55:46 (lmgrd) and UNIX.
    10:55:46 (lmgrd)
    10:55:46 (lmgrd) -----------------------------------------------
    10:55:46 (lmgrd)
    10:55:46 (lmgrd)
    10:55:46 (lmgrd) Server's System Date and Time: Sat Sep 19 2020 10:55:46 中国标准时间
    10:55:46 (lmgrd) pid 11648
    10:55:46 (lmgrd) SLOG: Summary LOG statistics is enabled.
    10:55:46 (lmgrd) license manager: can't initialize:Cannot find license file.
    10:55:46 (lmgrd) The license files (or license server system network addresses) attempted are
    10:55:46 (lmgrd) listed below. Use LM_LICENSE_FILE to use a different license file,
    10:55:46 (lmgrd) or contact your software provider for a license file.
    10:55:46 (lmgrd) Filename: "C:\flexlm\license.dat"
    10:55:46 (lmgrd) License Path: "C:\flexlm\license.dat"
    10:55:46 (lmgrd) FlexNet Licensing error:-1,359
    10:55:46 (lmgrd) System Error:2 No such file or directory
    10:55:46 (lmgrd) Using license file "C:\flexlm\license.dat"

      1. 麻辣GIS-Sailor
        Sailor  · 2020-11-13 00:31

        可能是替换注册文件的问题,看看是不是替换对了。

  54. 麻辣GIS-Leila
    54#
    Leila  · 2020-09-23 16:08

    cmd命令行提示错误,已生无可恋,请大神指点
    16:04:59 (lmgrd) SLOG: FNPLS-INTERNAL-VL1-4096
    16:04:59 (lmgrd) Starting vendor daemons ...
    16:04:59 (lmgrd) Started ARCGIS (pid 2276)
    16:05:04 (lmgrd) ARCGIS exited with status 123 ()
    16:05:04 (lmgrd) Since this is an unknown status, license server
    16:05:04 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:04 (lmgrd) REStarted ARCGIS (pid 14272)
    16:05:09 (lmgrd) ARCGIS exited with status 123 ()
    16:05:09 (lmgrd) Since this is an unknown status, license server
    16:05:09 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:09 (lmgrd) REStarted ARCGIS (pid 14520)
    16:05:14 (lmgrd) ARCGIS exited with status 123 ()
    16:05:14 (lmgrd) Since this is an unknown status, license server
    16:05:14 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:14 (lmgrd) REStarted ARCGIS (pid 9472)
    16:05:19 (lmgrd) ARCGIS exited with status 123 ()
    16:05:19 (lmgrd) Since this is an unknown status, license server
    16:05:19 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:19 (lmgrd) REStarted ARCGIS (pid 2212)
    16:05:24 (lmgrd) ARCGIS exited with status 123 ()
    16:05:24 (lmgrd) Since this is an unknown status, license server
    16:05:24 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:24 (lmgrd) REStarted ARCGIS (pid 3700)
    16:05:29 (lmgrd) ARCGIS exited with status 123 ()
    16:05:29 (lmgrd) Since this is an unknown status, license server
    16:05:29 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:29 (lmgrd) REStarted ARCGIS (pid 12976)
    16:05:34 (lmgrd) ARCGIS exited with status 123 ()
    16:05:34 (lmgrd) Since this is an unknown status, license server
    16:05:34 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:34 (lmgrd) REStarted ARCGIS (pid 3316)
    16:05:39 (lmgrd) ARCGIS exited with status 123 ()
    16:05:39 (lmgrd) Since this is an unknown status, license server
    16:05:39 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:39 (lmgrd) REStarted ARCGIS (pid 13712)
    16:05:44 (lmgrd) ARCGIS exited with status 123 ()
    16:05:44 (lmgrd) Since this is an unknown status, license server
    16:05:44 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:44 (lmgrd) REStarted ARCGIS (pid 13484)
    16:05:49 (lmgrd) ARCGIS exited with status 123 ()
    16:05:49 (lmgrd) Since this is an unknown status, license server
    16:05:49 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    16:05:49 (lmgrd) REStarted ARCGIS (pid 7804)
    16:05:54 (lmgrd) ARCGIS exited with status 123 ()
    16:05:54 (lmgrd) Please correct problem and restart daemons

      1. 麻辣GIS-Sailor
        Sailor  · 2020-11-13 00:49

        生无可恋?我回复的时候你还好吗?

          1. 麻辣GIS-Leila
            Leila  · 2021-01-29 10:55

            后来解决了哈。是缺vc++2013环境,win10没报错,换了台win7就报错了。补装上就成功启动了。

              1. 麻辣GIS-Sailor
                Sailor  · 2021-01-30 22:54

                666,谢谢老铁反馈。

  55. 麻辣GIS-baroll
    55#
    baroll  · 2020-10-27 21:04

    E:\Program Files\ArcGIS\License10.5\bin>lmgrd -z -c service.txt
    20:59:14 (lmgrd) -----------------------------------------------
    20:59:14 (lmgrd) Please Note:
    20:59:14 (lmgrd)
    20:59:14 (lmgrd) This log is intended for debug purposes only.
    20:59:14 (lmgrd) In order to capture accurate license
    20:59:14 (lmgrd) usage data into an organized repository,
    20:59:14 (lmgrd) please enable report logging. Use Flexera Software LLC's
    20:59:14 (lmgrd) software license administration solution,
    20:59:14 (lmgrd) FlexNet Manager, to readily gain visibility
    20:59:14 (lmgrd) into license usage data and to create
    20:59:14 (lmgrd) insightful reports on critical information like
    20:59:14 (lmgrd) license availability and usage. FlexNet Manager
    20:59:14 (lmgrd) can be fully automated to run these reports on
    20:59:14 (lmgrd) schedule and can be used to track license
    20:59:14 (lmgrd) servers and usage across a heterogeneous
    20:59:14 (lmgrd) network of servers including Windows NT, Linux
    20:59:14 (lmgrd) and UNIX. Contact Flexera Software LLC at
    20:59:14 (lmgrd) www.flexerasoftware.com for more details on how to
    20:59:14 (lmgrd) obtain an evaluation copy of FlexNet Manager
    20:59:14 (lmgrd) for your enterprise.
    20:59:14 (lmgrd)
    20:59:14 (lmgrd) -----------------------------------------------
    20:59:14 (lmgrd)
    20:59:14 (lmgrd)
    20:59:14 (lmgrd) Server's System Date and Time: Tue Oct 27 2020 20:59:14 中国标
    准时间
    20:59:14 (lmgrd) pid 4116
    20:59:15 (lmgrd) SLOG: Summary LOG statistics is enabled.
    20:59:15 (lmgrd) Done rereading
    20:59:15 (lmgrd) FlexNet Licensing (v11.13.1.5 build 183191 i86_n3) started on y
    angbaiju (IBM PC) (10/27/2020)
    20:59:15 (lmgrd) Copyright (c) 1988-2015 Flexera Software LLC. All Rights Reserv
    ed.
    20:59:15 (lmgrd) World Wide Web: http://www.flexerasoftware.com
    20:59:15 (lmgrd) License file(s): service.txt
    20:59:15 (lmgrd) lmgrd tcp-port 27009
    20:59:15 (lmgrd) (@lmgrd-SLOG@) ===============================================
    20:59:15 (lmgrd) (@lmgrd-SLOG@) === LMGRD ===
    20:59:15 (lmgrd) (@lmgrd-SLOG@) Start-Date: Tue Oct 27 2020 20:59:15 中国标准时

    20:59:15 (lmgrd) (@lmgrd-SLOG@) PID: 4116
    20:59:15 (lmgrd) (@lmgrd-SLOG@) LMGRD Version: v11.13.1.5 build 183191 i86_n3 (
    build 183191 (ipv6))
    20:59:15 (lmgrd) (@lmgrd-SLOG@)
    20:59:15 (lmgrd) (@lmgrd-SLOG@) === Network Info ===
    20:59:15 (lmgrd) (@lmgrd-SLOG@) Listening port: 27009
    20:59:15 (lmgrd) (@lmgrd-SLOG@)
    20:59:15 (lmgrd) (@lmgrd-SLOG@) === Startup Info ===
    20:59:15 (lmgrd) (@lmgrd-SLOG@) Is LS run as a service: No
    20:59:15 (lmgrd) (@lmgrd-SLOG@) Server Configuration: Single Server
    20:59:15 (lmgrd) (@lmgrd-SLOG@) Command-line options used at LS startup: -z -c s
    ervice.txt
    20:59:15 (lmgrd) (@lmgrd-SLOG@) License file(s) used: service.txt
    20:59:15 (lmgrd) (@lmgrd-SLOG@) ===============================================
    20:59:15 (lmgrd) SLOG: FNPLS-INTERNAL-VL1-4096
    20:59:15 (lmgrd) Starting vendor daemons ...
    20:59:15 (lmgrd) Started ARCGIS (pid 7296)
    20:59:15 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:15 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:15 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:20 (lmgrd) ARCGIS exited with status 1 signal = 436
    20:59:20 (lmgrd) Since this is an unknown status, license server
    20:59:20 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:20 (lmgrd) REStarted ARCGIS (pid 4236)
    20:59:21 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:21 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:21 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:25 (lmgrd) ARCGIS exited with status 1 signal = 444
    20:59:25 (lmgrd) Since this is an unknown status, license server
    20:59:25 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:25 (lmgrd) REStarted ARCGIS (pid 4796)
    20:59:26 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:26 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:26 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:30 (lmgrd) ARCGIS exited with status 1 signal = 464
    20:59:30 (lmgrd) Since this is an unknown status, license server
    20:59:30 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:30 (lmgrd) REStarted ARCGIS (pid 4312)
    20:59:31 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:31 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:31 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:35 (lmgrd) ARCGIS exited with status 1 signal = 472
    20:59:35 (lmgrd) Since this is an unknown status, license server
    20:59:35 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:35 (lmgrd) REStarted ARCGIS (pid 2848)
    20:59:36 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:36 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:36 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:40 (lmgrd) ARCGIS exited with status 1 signal = 480
    20:59:40 (lmgrd) Since this is an unknown status, license server
    20:59:40 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:40 (lmgrd) REStarted ARCGIS (pid 5348)
    20:59:41 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:41 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:41 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:45 (lmgrd) ARCGIS exited with status 1 signal = 488
    20:59:45 (lmgrd) Since this is an unknown status, license server
    20:59:45 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:45 (lmgrd) REStarted ARCGIS (pid 6880)
    20:59:46 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:46 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:46 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:50 (lmgrd) ARCGIS exited with status 1 signal = 504
    20:59:50 (lmgrd) Since this is an unknown status, license server
    20:59:50 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:50 (lmgrd) REStarted ARCGIS (pid 7192)
    20:59:51 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:51 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:51 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    20:59:55 (lmgrd) ARCGIS exited with status 1 signal = 508
    20:59:55 (lmgrd) Since this is an unknown status, license server
    20:59:55 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    20:59:55 (lmgrd) REStarted ARCGIS (pid 5560)
    20:59:56 (ARCGIS) Unable to initialize access to trusted storage: 6
    20:59:56 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    20:59:56 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    21:00:00 (lmgrd) ARCGIS exited with status 1 signal = 516
    21:00:00 (lmgrd) Since this is an unknown status, license server
    21:00:00 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    21:00:00 (lmgrd) REStarted ARCGIS (pid 5596)
    21:00:01 (ARCGIS) Unable to initialize access to trusted storage: 6
    21:00:01 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    21:00:01 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    21:00:05 (lmgrd) ARCGIS exited with status 1 signal = 524
    21:00:05 (lmgrd) Since this is an unknown status, license server
    21:00:05 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    21:00:05 (lmgrd) REStarted ARCGIS (pid 1452)
    21:00:06 (ARCGIS) Unable to initialize access to trusted storage: 6
    21:00:06 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    21:00:06 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    21:00:10 (lmgrd) ARCGIS exited with status 1 signal = 532
    21:00:10 (lmgrd) Please correct problem and restart daemons
    我这个启动不了是什么情况呢?

      1. 麻辣GIS-Sailor
        Sailor  · 2020-11-13 00:50

        一些文件被系统中的其他软件删除了。

          1. 麻辣GIS-baroll
            baroll  · 2020-12-23 16:15

            现在是能正常启动了。除了安装及破解时杀毒软件一直要保持关闭,似乎计算机的名字也不能有特殊字符、汉字。换成全英文就行了。但是使用上还有问题。凡是用到工具箱里的功能都是一直保持运算中的状态,出不来结果,这又是什么原因?

              1. 麻辣GIS-Sailor
                Sailor  · 2021-01-03 11:25

                之前有的朋友的解决方案是把后台运行关闭就可以了。

              2. 麻辣GIS-Sailor
                Sailor  · 2021-01-03 11:26

                arcmap里面地理处理选项中的后台处理启用选项取消,你可以试试这个方法。

                  1. 麻辣GIS-baroll
                    baroll  · 2021-08-26 15:47

                    OK!管用。另外发现ArcGIS License Manager 无法启动的问题,在安装前感觉除了把安全软件、系统防火墙关了,还得把网络断了

  56. 麻辣GIS-Dorad
    56#
    Dorad  · 2020-11-02 21:18

    ArcGIS License Manager 无法启动
    报错 “Sorry, this application cannot run under a virtual machine” 的同学可以参考这里:
    https://blog.cuger.cn/p/37141/

  57. 麻辣GIS-zpy
    57#
    zpy  · 2020-11-14 21:41

    用了方案二以后,它弹出一句“本地计算机上的ArcGIS License Manager服务启动后停止。某些服务在末由其他服务或程序使用时将自动停止。”是什么情况呀?

      1. 麻辣GIS-Sailor
        Sailor  · 2020-11-16 15:51

        应该是系统问题,有其他服务阻止了ArcGIS

          1. 麻辣GIS-GEM
            GEM  · 2021-01-14 20:48

            我也是这样,秃头啊搞了半天。

              1. 麻辣GIS-Sailor
                Sailor  · 2021-01-16 12:10

                把系统里的各种安全软件及优化软件关闭先。

  58. 麻辣GIS-bobor
    58#
    bobor  · 2020-11-24 11:56

    个人再提供一个思路:
    网上随便找个ARCGIS注册机,重新生成10.1的service文件,再替换。目前站里提供的10.1service文件有点老了,有效期是2020-1-1应该是早就过期了。昨天折腾了一下午,所有方法都试了一遍,甚至电脑都重装系统了,终于按照这个思路搞定了。

      1. 麻辣GIS-Sailor
        Sailor  · 2020-11-25 18:46

        10.1 9.3应该都过期了,谢谢提醒。

  59. 麻辣GIS-plea
    59#
    plea  · 2021-01-15 18:39

    如日志,请问这种情况是什么原因呢?
    18:37:32 (lmgrd) SLOG: FNPLS-INTERNAL-VL1-4096
    18:37:32 (lmgrd) Starting vendor daemons ...
    18:37:42 (lmgrd) Started ARCGIS (pid 2140)
    18:37:44 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:37:44 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:37:44 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    18:37:45 (lmgrd) ARCGIS exited with status 1 signal = 936
    18:37:45 (lmgrd) Since this is an unknown status, license server
    18:37:45 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    18:37:45 (lmgrd) REStarted ARCGIS (pid 7932)
    18:37:47 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:37:47 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:37:47 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    18:37:50 (lmgrd) ARCGIS exited with status 1 signal = 940
    18:37:50 (lmgrd) Since this is an unknown status, license server
    18:37:50 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    18:37:50 (lmgrd) REStarted ARCGIS (pid 5784)
    18:37:52 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:37:52 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:37:52 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    18:37:55 (lmgrd) ARCGIS exited with status 1 signal = 964
    18:37:55 (lmgrd) Since this is an unknown status, license server
    18:37:55 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    18:37:55 (lmgrd) REStarted ARCGIS (pid 1632)
    18:37:57 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:37:57 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:37:57 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    18:38:00 (lmgrd) ARCGIS exited with status 1 signal = 956
    18:38:00 (lmgrd) Since this is an unknown status, license server
    18:38:00 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    18:38:00 (lmgrd) REStarted ARCGIS (pid 8744)
    18:38:02 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:38:02 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:38:02 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.
    18:38:04 (lmgrd) ARCGIS exited with status 1 signal = 972
    18:38:04 (lmgrd) Since this is an unknown status, license server
    18:38:04 (lmgrd) manager (lmgrd) will attempt to re-start the vendor daemon.
    18:38:04 (lmgrd) REStarted ARCGIS (pid 3280)
    18:38:05 (ARCGIS) Unable to initialize access to trusted storage: 6
    18:38:05 (ARCGIS) FlexNet Licensing version v11.13.1.2 build 173302 i86_n3
    18:38:05 (ARCGIS) ERROR: Could not start ARCGIS vendor daemon.

      1. 麻辣GIS-Sailor
        Sailor  · 2021-01-16 12:12

        一直就是Unable to initialize access to trusted storage在重复,无法判断出来。

  60. 麻辣GIS-小白
    60#
    小白  · 2021-03-30 15:48

    S G:\ArcGIS\License10.6\bin> .\lmgrd.exe -z -c service副本.txt
    15:46:42 (lmgrd) -----------------------------------------------
    15:46:42 (lmgrd) Please Note:
    15:46:42 (lmgrd)
    15:46:42 (lmgrd) This log is intended for debug purposes only.
    15:46:42 (lmgrd) In order to capture accurate license
    15:46:42 (lmgrd) usage data into an organized repository,
    15:46:42 (lmgrd) please enable report logging. Use Flexera Software LLC's
    15:46:42 (lmgrd) software license administration solution,
    15:46:42 (lmgrd) FlexNet Manager, to readily gain visibility
    15:46:42 (lmgrd) into license usage data and to create
    15:46:42 (lmgrd) insightful reports on critical information like
    15:46:42 (lmgrd) license availability and usage. FlexNet Manager
    15:46:42 (lmgrd) can be fully automated to run these reports on
    15:46:42 (lmgrd) schedule and can be used to track license
    15:46:42 (lmgrd) servers and usage across a heterogeneous
    15:46:42 (lmgrd) network of servers including Windows NT, Linux
    15:46:42 (lmgrd) and UNIX.
    15:46:42 (lmgrd)
    15:46:42 (lmgrd) -----------------------------------------------
    15:46:42 (lmgrd)
    15:46:42 (lmgrd)
    15:46:42 (lmgrd) Server's System Date and Time: Tue Mar 30 2021 15:46:42 中国标准时间
    15:46:42 (lmgrd) pid 6456
    15:46:42 (lmgrd) SLOG: Summary LOG statistics is enabled.
    15:46:42 (lmgrd) Failed to open the TCP port number in the license.
    PS G:\ArcGIS\License10.6\bin>


    @Sailor 方案三 清问现在怎么办呢?

      1. 麻辣GIS-Sailor
        Sailor  · 2021-03-31 16:51

        方案三提供的是系统诊断信息,如果您看不懂,不建议用。

  61. 麻辣GIS-berlin
    61#
    berlin  · 2021-12-18 12:24

    12:21:20 (ARCGIS) EXTERNAL FILTERS are OFF
    12:21:20 (lmgrd) ARCGIS using TCP-port 51389
    12:21:26 (lmgrd) LICENSE DAEMON died due to signal 2
    12:21:26 (lmgrd) lmgrd will now shut down all the vendor daemons

    请问如下报错是什么原因造成的呢?目前license server里显示服务已启动,但是arcmap在启动窗口就会闪退
    12:21:26 (lmgrd) Shutting down ARCGIS pid=800 because of signal 2
    12:21:26 (lmgrd) Can't connect to the license server system. Shutdown ARCGIS failed.
    12:21:26 (lmgrd) Cannot read data from license server system. (-16,10009:10054 "WinSock: Connection reset by peer")
    12:21:26 (lmgrd) Can't shutdown the license server system. Shutdown ARCGIS failed.
    12:21:26 (lmgrd) EXITING DUE TO SIGNAL 2

  62. 麻辣GIS-berlin
    62#
    berlin  · 2021-12-18 12:25

    (接上条,格式错误;抱歉!)
    请问如下报错是什么原因造成的呢?目前license server里显示服务已启动,但是arcmap在启动窗口就会闪退

    12:21:20 (ARCGIS) EXTERNAL FILTERS are OFF
    12:21:20 (lmgrd) ARCGIS using TCP-port 51389
    12:21:26 (lmgrd) LICENSE DAEMON died due to signal 2
    12:21:26 (lmgrd) lmgrd will now shut down all the vendor daemons
    12:21:26 (lmgrd) Shutting down ARCGIS pid=800 because of signal 2
    12:21:26 (lmgrd) Can't connect to the license server system. Shutdown ARCGIS failed.
    12:21:26 (lmgrd) Cannot read data from license server system. (-16,10009:10054 "WinSock: Connection reset by peer")
    12:21:26 (lmgrd) Can't shutdown the license server system. Shutdown ARCGIS failed.
    12:21:26 (lmgrd) EXITING DUE TO SIGNAL 2

  63. 麻辣GIS-lilikeke
    63#
    lilikeke  · 2022-03-04 19:29

    第一次下载的时候也是弄了很久,尝试命令行,一顿操作然后成功了。20几天天后断网开着gis,license直就罢工了,然后打开就是error15,用命令行也不再起作用,就会出现Running the license server manager (lmgrd) in dedicated windows ...和 (lmgrd) Use -z to run in foreground in this window
    然后接C:\Program Files (x86)\ArcGIS\License10.2\bin>,并不是没复制全,反正出现这个感觉就不会加载。找了别的方法,也然后重装license多次无果。。。。。。直到!【找了别的10.2补丁】,一下子就启动成功了。各种方法不行的也可以别处找个补丁。

  64. 麻辣GIS-Geek
    64#
    Geek  · 2022-03-10 16:14

    .\lmgrd.exe -z -c .\service副本.txt
    16:12:30 (lmgrd) -----------------------------------------------
    16:12:30 (lmgrd) Please Note:
    16:12:30 (lmgrd)
    16:12:30 (lmgrd) This log is intended for debug purposes only.
    16:12:30 (lmgrd) In order to capture accurate license
    16:12:30 (lmgrd) usage data into an organized repository,
    16:12:30 (lmgrd) please enable report logging. Use Flexera Software LLC's
    16:12:30 (lmgrd) software license administration solution,
    16:12:30 (lmgrd) FlexNet Manager, to readily gain visibility
    16:12:30 (lmgrd) into license usage data and to create
    16:12:30 (lmgrd) insightful reports on critical information like
    16:12:30 (lmgrd) license availability and usage. FlexNet Manager
    16:12:30 (lmgrd) can be fully automated to run these reports on
    16:12:30 (lmgrd) schedule and can be used to track license
    16:12:30 (lmgrd) servers and usage across a heterogeneous
    16:12:30 (lmgrd) network of servers including Windows NT, Linux
    16:12:30 (lmgrd) and UNIX.
    16:12:30 (lmgrd)
    16:12:30 (lmgrd) -----------------------------------------------
    16:12:30 (lmgrd)
    16:12:30 (lmgrd)
    16:12:30 (lmgrd) Server's System Date and Time: Thu Mar 10 2022 16:12:30 中国标准时间
    16:12:30 (lmgrd) pid 2060
    16:12:30 (lmgrd) SLOG: Summary LOG statistics is enabled.
    16:12:30 (lmgrd) license manager: can't initialize:Invalid license file syntax.
    16:12:30 (lmgrd) License Path: ".\service鍓湰.txt"
    16:12:30 (lmgrd) FlexNet Licensing error:-2,40027


    方法三运行报错

  65. 麻辣GIS-gis20230607
    65#
    gis20230607  · 2023-06-07 22:04

    楼上提到了命令行"lmgrd -z -c service.txt ",运行时报错This application cannot run under a virtual machine,亲测修改内核有效:
    1、WIN10系统按下win+i打开windows 设置;2、在WIN10系统设置界面点击【更新和安全】;3、在更新和安全WIN10系统界面左侧点击【windows 安全】,在右侧点击【设备安全性】;4、点击WIN10系统“内核隔离”;5、在内核隔离界面将“内存完整性”下面的开关关闭即可

    【另:走完全部安装流程后仍不能将“内存完整性”打开,会打不开软件……】
    【所以还是尽量上pro(笑】

      1. 麻辣GIS-Sailor
        Sailor  · 2023-06-08 21:47

        牛X,好家伙,都玩这么高深了

留言板(小编看到第一时间回复) 取消回复